| MIDI Ringtone |
| Model No. |
Descriptions |
Features |
Package |
| ft1601Y |
40-polyphony MIDI ringtone processor |
-40 polyphonies
-Stream replay with ADPCM
-8-bit parallel host interface
-Internal 16-bit DAC
-Internal mono speaker amplifier
-LED and vibrator control
|
QFN32 (5.2mm x 6.2mm) |
| ft1601A |
48-polyphony MIDI ringtone processor |
-48 polyphonies
-8-bit parallel host interface
-Stream replay with ADPCM
-Internal 16-bit DAC
-Internal mono speaker amplifier
-LED and vibrator control
|
QFN32 (5.2mm x 6.2mm) |
| MP3 Ringtone and Playback |
| Model No. |
Descriptions |
Features |
Package |
| ft1960N |
MP3 and 64-polyphony MIDI Processor |
- wavetable generator: 64 polyphonies
- Stream replay with ADPCM
- MP3 decoder
- internal 16bit DAC
- internal stereo headphone and stereo speaker amp
- LED and vibrator control
|
48 LPCC(QFN) |
| Analog device |
| Model No. |
Descriptions |
Features |
Package |
| ft690 |
audio power amplifier
|
-Power Output at 5.0V, 1% THD+N, 8Ω 1.25W (typ)
-Shutdown Current 0.1μA (typ)
-Improved pop & click circuitry eliminates noise during
turn-on and turn-off transitions
|
DFN MSOP WCSP |
| ft6203 |
1.25W mono fully differential audio power amplifier
|
1.25W into 8Ω from a 5-V supply at 1% THD (Typical)
Supply current: 1.9mA (typical)
Shutdown current: less than 10μA
PSSR: 90dB
Wide supply voltage: 2.5V to 5.5V
Fully differential design to reduce RF rectification
Improved CMRR design to save the cost of two input coupling capacitors
|
ft6203D: 3mm x 3mm DFN
ft6203M: 3mm x 4.8mm MSOP |
| ft4888 |
2.1W bridge-connected dual audio amplifier
|
Dual channel audio amplifier design
User-configurable headphone select scheme
3D effect enhancement
Micro power shutdown mode
Thermal shutdown protection
Improved “click and pop” suppression circuitry
|
4mm x 4mm QFN-24 |
| ft4288 |
2.1W bridge-connected dual audio amplifier
|
Micro power shutdown mode
Thermal shutdown protection
Improved “click and pop” suppression circuitry
Space-saving QFN package.
|
QFN-16 (4mm x 4mm) |
| ft809 |
power supply supervisory circuits
|
Precision monitoring of 2.63V/ 2.93V/ 3.08V
Fully specified over temperatures
140ms min. Power-On-Reset pulse width
10μA low supply current
Power supply transient immunity
|
SOT23-3(2.9mm x 2.8mm) |
| ft2010 |
Class-D audio power amplifier
|
-Power Output at 5.0V, 10% THD+N,8Ω1.65W (typ)
-Shutdown Current 0.1μA (typ)
-PSRR: -75dB
-Efficiency up to 90%
Power supply transient immunity
|
WCSP-9 |
| ft4266 |
1.3W Dual Audio Power Amplifier
|
-Micro power shutdown mode
-Thermal shutdown protection
-Improved "click and pop" suppression circuitry
-Space-saving QFN package
|
QFN-16 (3mm X 3mm) |
| ft3157 |
Analog switch SPDT
|
-Operation voltage: 1.65V to 5.5V
-Low on-resistance: 4 Ω @ 4.5V (Typ)
-250MHz @ -3dB bandwidth
-Fast switching times
-tON 20ns
-tOFF 15ns
|
SC70-6 (2.0mm X 2.1mm) |
| ft6188 |
Dual SIM Card Controller
|
-Supply Range: 2.7V to 5.5V
-IBAT(SD): 0.1μA
-1.8V Mode Output Range: 1.65V to 1.95V
-3.3V Mode Output Range: 2.82V to 3.18V
-Maximum Output Current: 38mA (typical)
-Turn-on Time: 0.8ms (typical); 1.5ms (max.)
|
QFN-20 (3mm X 3mm; 0.4mm pitch) |
| ft2012 |
ClassD audio power amplifier
|
-Output power
-2.1W/ch into 4Ω at 5V
-1.5W/ch into 8Ω at 5V
-750mW/ch into 8Ω at 3.6V
-PSRR: -75dB (typical)
-CMRR: -70dB (typical)
-Efficiency up to 90%
|
QFN-20 (4mm X 4mm)
WCSP-16(2mm X 2mm) |
